3d Printing Crew: Tugboats up in this biatch

[CPTMULLET]

Y'all have any advice for printing threads? I'm trying to make m6 threads in that penis model but they just don't seem to play nice

 

[CPTMULLET]

I fucked with scaling from 100.5% to 103 and some quality settings with no meaningful change in usability

 

[lowfat]

Y'all have any advice for printing threads? I'm trying to make m6 threads in that penis model but they just don't seem to play nice

I always print them. But them tap them afterward.

 

[Capt. Hammer]

View attachment 310654


I fucked with scaling from 100.5% to 103 and some quality settings with no meaningful change in usability

View attachment 310655

Why are you like this

 

[CPTMULLET]

I always print them. But them tap them afterward.

didn't want to get plastic all over my tap, so I tapped one with a HF bolt and I guess it worked OK

 

[CPTMULLET]

Why are you like this

 

[CPTMULLET]

suck my dick @Capt. Hammer

 

[CPTMULLET]

I also made this bracket for my ram ball, but that's boring

 

[TheGreat8]

So if I add 2 part cooling fans, do I splice them to the same line or what? Would that split whatever power between them and make them suck?

Also, should I get 24v or 12v?

 

[Ramathorn15]

So if I add 2 part cooling fans, do I splice them to the same line or what? Would that split whatever power between them and make them suck?

Also, should I get 24v or 12v?

A Y in the wire with no less than 4 wire nuts or it won't work.

 

[CPTMULLET]

So if I add 2 part cooling fans, do I splice them to the same line or what? Would that split whatever power between them and make them suck?

Also, should I get 24v or 12v?

buy whatever voltage the toolhead already has and just y them

 

[TheGreat8]

A Y in the wire with no less than 4 wire nuts or it won't work.

I've got plenty of wire nuts, so I'm ready

Anyone ever had a Laser engraver attachment setup?

 

[CPTMULLET]

getting a lot faster in Fusion this was only like 30 minutes first revision of a screwdriver holder for my workbench

 

[TheGreat8]

getting a lot faster in Fusion this was only like 30 minutes first revision of a screwdriver holder for my workbench
View attachment 310686

Dang, I really wanna learn how to use Fusion, but I'm still trying to figure out all the nuances and basic shit of 3d printing, so I think it'll be a while..

 

[CPTMULLET]

Dang, I really wanna learn how to use Fusion, but I'm still trying to figure out all the nuances and basic shit of 3d printing, so I think it'll be a while..

it's what I like about the bambu/prusa, they just work so I can spend time not fucking with stuff and learning Fusion

 

[TheGreat8]

buy whatever voltage the toolhead already has and just y them

Extra dumb question...Where would I look for that

 

[Cicada]

halot one cl-60 for only $99 at microcenter

might scoop and try resin printing

 

[Cicada]

Extra dumb question...Where would I look for that

google it — what printer?

 

[TheGreat8]

google it — what printer?

When I google, it says they have both. They're an Ender 3 Neo V2 and a CR-10 S Pro V2.

 

[CPTMULLET]

Extra dumb question...Where would I look for that

google, the sticker on the fan, turn the part cooling fans on to 100% and check with a multimeter

 

[TheGreat8]

Got it, thanks. Sorry, I try to avoid asking googleable stuff

 

[TheGreat8]

I found a couple that were more clear and apparently it's 24 volts for the Ender.

 

[Ramathorn15]

it's what I like about the bambu/prusa, they just work so I can spend time not fucking with stuff and learning Fusion

Seriously. I have a huge folder full of designs I made over the last few years but was never able to print well enough to be useable. Gotta start sifting through it and printing after I get this enclosure, hepa/carbon filter, and light figured out on the Bambu

 

[TheGreat8]

I've noticed that my CR-10 prints way slower than my Ender. I have Octoprint running the Cr-10. Are default speed settings on Octoprint slow or something? I don't think I have adjusted them and it seems like it's painfully slow. Is there a way to change that?

 

[FritoBandito]

I've noticed that my CR-10 prints way slower than my Ender. I have Octoprint running the Cr-10. Are default speed settings on Octoprint slow or something? I don't think I have adjusted them and it seems like it's painfully slow. Is there a way to change that?

Make sure you have the right speed settings in axes under the printer profile in Octoprint .