3d Printing Crew: Tugboats up in this biatch

[CPTMULLET]

Just prints slower than PLA.

yeah but not a ton

 

[lowfat]

On my Prusa I print solid infill @ 325mm/s for PLA (220C) and 250mm/s for PETG (245C).

 

[CPTMULLET]

On my Prusa I print solid infill @ 325mm/s for PLA (220C) and 250mm/s for PETG (245C).

at what flow rate?

 

[lowfat]

at what flow rate?

27.5 mm^3s for PETG and 35.75 mm^3s for PLA.

 

[CopenKagan]

I hate coming in this thread. It makes me miss making stuff.

Prusa has had my MK3 for 3 weeks. Starting to wonder whether they'll ship the MK4 or issue my refund first.

 

[93rx7]

its alliveeee

 

[Ramathorn15]

its alliveeee

First thing you'll want to do is swap the shitty drain with a lower profile one. Can't believe they still haven't fixed that.

I used a bar sink style drain with a stopper plug. Connect that to some PVC then down to a bucket. Makes clean up a bit easier.

 

[93rx7]

First thing you'll want to do is swap the shitty drain with a lower profile one. Can't believe they still haven't fixed that.

I used a bar sink style drain with a stopper plug. Connect that to some PVC then down to a bucket. Makes clean up a bit easier.

i also like how they dont offer a water table big enough for the xl kit

will do tho, thx 4 tip!

 

[Ramathorn15]

I can hear the machine jogging when I watch that gif

 

[93rx7]

I can hear the machine jogging when I watch that gif

i still have to get the limit switches on there, figure out where to put the plasma cutter and wire that up, get some water table water, and and and



oh and run real power and air to the barn

 

[whatever]

I hate coming in this thread. It makes me miss making stuff.

Prusa has had my MK3 for 3 weeks. Starting to wonder whether they'll ship the MK4 or issue my refund first.

did you sent it back to HQ?

 

[whatever]

i still have to get the limit switches on there, figure out where to put the plasma cutter and wire that up, get some water table water, and and and



oh and run real power and air to the barn

mmmm trenching.

 

[whatever]

 

[93rx7]

mmmm trenching.

yay my smallest bucket is 18"

 

[whatever]

yay my smallest bucket is 18"

someone local to you has to have a trenching bucket you can rent

 

[93rx7]

someone local to you has to have a trenching bucket you can rent

aint too worried aboot it

make a mess and clean er up

 

[whatever]

aint too worried aboot it

make a mess and clean er up

true true. plus you feel more manly in a big trench.

 

[TheRider]

So... Ordered this early in the AM to go with my MK4. Will be interesting to compare the two

 

[Ramathorn15]

i still have to get the limit switches on there, figure out where to put the plasma cutter and wire that up, get some water table water, and and and



oh and run real power and air to the barn

I've been debating getting the limit switches. I don't really ever feel I need them though.

 

[whatever]

I've been debating getting the limit switches. I don't really ever feel I need them though.

no one needs a limit switch until they do

 

[whatever]

guess we're gona see if that is too much overhang....

 

[TheRider]

guess we're gona see if that is too much overhang....
View attachment 329839

Why don't you break it into 2 modular pieces and then no support should be needed?

 

[TheRider]

Also ordered this https://www.costco.com/Winix-Tower-XQ-Air-Purifier.product.1292967.html to see how much of a difference it makes for air quality, I can seal my main printing room up and let that thing run, should air exchange in less than 5 minutes.

 

[whatever]

Why don't you break it into 2 modular pieces and then no support should be needed?

because that is beyond my modeling skill set at this time.

 

[CPTMULLET]

27.5 mm^3s for PETG and 35.75 mm^3s for PLA.

are you running a magnum mosquito or something?

Why don't you break it into 2 modular pieces and then no support should be needed?

fuck your logic