At a loss- v.HP nc6110

Discussion in 'OT Technology' started by Elfling, Nov 14, 2006.

  1. Elfling

    Elfling New Member

    Aug 10, 2004
    Likes Received:
    Came in with weird sort-of shorting out problems. Replaced system board and processor, worked fine for a couple of days, then went on the fritz. We found that the two screws near the LCD seemed to be causing the system board to short out :wtf: If you pulled those out, it would turn on and behave.

    Then two days later, it's back in with what appears to be a dead system board again. I'm just at a loss- the power adapter is fine, checked that out with a voltmeter. Stripped it down to just the system board and added in one component at a time, still won't post.

Share This Page