Discussion in 'On Topic' started by THT, Aug 21, 2009.
and all I can say is
What an awesome upgrade. BRB improving my G21 trigger.
I really enjoy mine.
Very crisp break.
Did you also install the ZPM so that we have enough juice to dial into the Pegasus galaxy?
No, the Atlantis team took it
To Pegasus! Really though, is there a difference between the ZEV piece and the other ones on the market?
I don't have any basis of comparison but it's a huge improvement over the stock unit. Plus for $14 per gun, you can't go wrong.
THT give me a call I'll set you up for dealer pricing.
PM me your number and when's a good time to call. Looking forward to it!
Get Glockworx stuff at dealer pricing and extend us decent deals and I might be down for at least 1 unit.
THT Call the toll free number on our website. Phones are open mon - friday 11 am - 4pm pacific standard times.
I always give deals to OT'ers ask around.
Will do; you'll hear from me tomorrow.
Are the parts for the larger frame guns the same as the other guns? I have my G29 that I wouldn't mind sprucing up, and I might get my dad a setup for his G20 for his birthday.
Hmm...just did my 21 and it's got a little catch about 1/3 of the way through the trigger pull. Any ideas anyone?
The large frame guns have larger parts. The trigger pad is the same but it's on a large bar. The 45's use a large firing pin safety and the 10mm's use the smaller firing pin safety as the 9mm, and 40's. Both the 45 and 10mm use the 45 ejector block housing, and the large striker.
The connector, and springs are the same for all glocks.
Really if your on a budget a race connector and spring kit will get you in the 2 lbs range for the trigger. For the shortened reset, pre travel and over travel you'll need to get a kit.
Is this a complete drop in trigger group?
I believe that would be the Fulcrum trigger
What are you guys talking about then, I don't own any Glocks, or pistols for that matter.
Connector may just need to be broken in to take it's initial set. They get lighter over time. You can tweak them a little bit by adjusting the bend. I'll talk to you about it tommrow. Don't want to get too much of this stuff out as people can do bad stuff with too much bending of the connector.
So, if I didn't want to spend a ton of money, but wanted some nicer stuff you'd say to go with the race connector and spring kit in the G29 and G20?