Discussion in 'OT Technology' started by LOUDSYSTEM, Mar 12, 2007.
you will never be satisfied
accept this now
seas lotus reference >.*
You could try putting a small resistor across the tweeters terminals.
Maybe a 1 ohm resistor to start. Something in the 1/2 watt range will do.
It won't move the crossover point around enough to notice, and might knock down some of the tweeters peak.
You don't have the processing to attenuate them?
scotch tape over the tweeter. that should be good for at least 1.5 dB.
What Elates do you have?