TV placement peoples

[matrix243]

I need opinion on mounting a 55" in a nook 45deg corner. Can't see any examples of it anywhere so it's probably not recommended. I'm guessing with the tv inset there would be a reflection off of the side wall which is a distraction? My plan was to build a custom center in that corner.





The other question is has anyone used this type of tv mount where all 4 lag bolts are inline so all the force is on that 1 lag bolt on top. Usually have across 2 studs. Wondering what kind of strain on that stud and bolt.

 

[Janson]

Make sure you put it as close to the celling as possible. OLEDS work best in thinner warmer air.

 

[whatever]

its fine. plenty strong.

 

[Rusty Shackleford]

I had a 42” plasma in my garage on one of those mounts. That tv must weigh 75lbs...no issues.

 

[matrix243]

its fine. plenty strong.

only 27lbs but will be extended 16"

 

[matrix243]

IMO you need to pick one of the two walls to mount it flat on.

custom mount?

 

[whatever]

fine.

 

[matrix243]

thats looking down btw

 

[matrix243]

 

[matrix243]

If you rotate the mount 90 degrees I don't think it will work or swivel the way you want it to check out the manual.

Installation Instruction - Mounting Dream MD2413-MX Installation Instruction [Page 6]

Mounting Dream MD2413-MX Manual Online: Installation Instruction. Step 1 Remove the bolt s (H) with Allen key (F) to separate wall plate unit (A) into two pieces. Concrete wall OR 1. Make sure the logo on the wall plate is upward as the picture shows. 2. Level the wall plate to make...

www.manualslib.com

It show it being mounted flat to the wall into a stud how you going to hit studs between two walls with an angle and compensate for the TV mount not being into contact with a flat surface?

A lot of pressure for those screws and the wall to handle at an extreme angle.

its vertical inline

 

[stevezissou]

its vertical inline

Makes much more since forget my posts lmao

 

[bigben14]

I’d think that mount would be fine? A 55” isn’t particularly heavy anyway

 

[matrix243]

This ones inset, would have reflection. Would also make for a cool effective on the media controlled back lighting.

 

[JerseyAhole]

Make sure you put it as close to the celling as possible. OLEDS work best in thinner warmer air.

interesting.. never heard that before but thanks, mounting one this weekend for my parents.. Happy Thanksgiving !!!

 

[Janson]

interesting.. never heard that before but thanks, mounting one this weekend for my parents.. Happy Thanksgiving !!!

Picture quality will be crisp.

 

[s2k]

they do make corner tv mount, something like this

Amazon link below, if you can't see it, it's your adblock

 

[matrix243]

they do make corner tv mount, something like this

Amazon link below, if you can't see it, it's your adblock

Damn. Would save me from building that back wall.